Used by prospectors and professional mining ops around the world, the Multi Sluice is a cleanup system built for one job: getting the gold out of the black sand in your concentrates. It’s not a toy. Full-scale operations use it too.
Reduction is the key
Just about anything can catch gold. The Multi Sluice is built for reduction: taking a pile of cons down to almost pure gold. In our own run, about 5 gallons of concentrates went through in two steps, about 30 minutes total, and left about 3 tablespoons of almost pure gold. No panning to speak of.
Five ways to run it
Most people pick two steps. Choose the modes that fit your material:
First pass: initial mat, full 1100 GPH, about 11° pitch, material classified to ¼”. A 5-gallon bucket runs in about 10–15 minutes and leaves about 1 cup of super cons. Most people catch about 95% of their gold by weight here.
Second pass: classify the tailings to 12–20 mesh, add the GPH restrictor and the Washer Mat, and set 13° pitch. You’re left with 2–3 tablespoons of cons.
Stripping mode (the “panning sucks” mode): same setup as the second pass. Spoon your cup of super cons back through slowly into a clean tub. In 2–3 minutes you’ll see pure lines of gold near the top of the mat.
Super fine mode: Doc’s newest mode, using the restrictor plug, the Washer Mat and 10.5° pitch on level water. Classify to 50 mesh and feed slowly to catch gold in the 100–300 mesh range, gold almost invisible to the eye.
Field mode: initial mat, a 10–12 foot hose and a 2000 GPH bilge pump. Classify to ¼–½” and run a 5-gallon bucket in about 10 minutes. A quiet, portable little recirculating machine for areas with little or no water.
Two mats included, plus an optional third
The Multi Sluice comes with two mats: the initial mat for your first pass, and the Washer Mat for cleanup. For even more stripping power, add the optional Stripper Mat for Multi.
Specs
Shipping weight: 19 lb
Includes: the initial mat, the Washer Mat and reducers